Author |
Message |
GR3
| Posted on Wednesday, October 10, 2001 - 6:10 pm: |
|
Is the board similar to cobra radios? what do I need to do to peak and tune one? |
A10a2
| Posted on Sunday, February 23, 2003 - 2:47 pm: |
|
GR3- I have the same radio, Someone told me to cut diode 110 or (D-110). I cannot find it. If you get any info on this radio PLEASE send it to me too. Thanks. |
Tech808
| Posted on Sunday, February 23, 2003 - 8:20 pm: |
|
A10a2, According to my books that is correct. MODULATION: Cut D110 AM POWER ADJUST: L106, L104, L102 Hope this helps some, Sorry cannot help you with location. Lon Tech808 |
Weakeststation
| Posted on Monday, February 24, 2003 - 9:03 pm: |
|
You nailed it again 808, take care im back out. Weakeststation, Glad I could Help. Lon Tech808
|
A10a2
| Posted on Friday, April 04, 2003 - 9:04 pm: |
|
Tech808. I went to the radioshack and tried to get a service manual but they don't sell them anymore. Do you or anyone else know how to get a hold of the tech info??? |
Turtle3564
| Posted on Sunday, February 15, 2004 - 1:44 am: |
|
what do each one do the L106,L104,L102 for the radio,and is there a way to turn down your deadkey on the radio |
Tech808
| Posted on Sunday, February 15, 2004 - 6:08 am: |
|
Turtle3564, L106, L104, L102 as stated above is your AM Power Setting Adjustments. You will need to adjust all three of these to lower your dead key and set the power where you want it. Hope this helps. Lon Tech808 |
Blackmountainme
New member Username: Blackmountainme
Post Number: 8 Registered: 1-2004
| Posted on Saturday, February 21, 2004 - 9:39 pm: |
|
Hi, I've also got a rad shack trc446. I'm getting a KL-300P amp from Copper - ordered today! and I've heard I need to turn down the power to 1 or 2 watts on the radio. (Any suggestions or advise on that?) Anyway, using the L102-106, how do these adjust the power? Does each need to be turned down the same amount? Is there any order in which they need to be turned? Can anyone provide a step by step instruction for this (or another radio) where I can just substitute my L102-106? I have access to a SWR/watt meter, so I can monitor the adjustments. It's just that I'm not sure what I'm looking for, but I'm ready to try :-) Any words of wisdom or a link to some would be greatly appreciated!!! :-) p.s I live not too far from Copper, do they accept drop-ins for a peak and tune? Otherwise, I don't know of a CB shop/tech in the Asheville NC area. Anyone? Thanks Mark |
Turtle3564
New member Username: Turtle3564
Post Number: 4 Registered: 2-2004
| Posted on Sunday, March 28, 2004 - 12:20 am: |
|
what is L301 &L302 do for a rad shak trc-446 |
|