Author |
Message |
Bbmfic
Member Username: Bbmfic
Post Number: 90 Registered: 1-2003
| Posted on Saturday, August 30, 2008 - 12:25 am: |
|
i have a jcd-201m & need to wire it up to President Zakary-T |
Hyperno_1979
Advanced Member Username: Hyperno_1979
Post Number: 729 Registered: 12-2005
| Posted on Saturday, August 30, 2008 - 5:55 am: |
|
From what i have is the Zachary T was wired as standard Uniden/Cobra 4 pin. Hope this is right as some of my info is out of date so i would double check. Or if it is 5 pin then standard Uniden/Cobra 5 pin. Hope this gets you on the air. CEFFFCEF Bob CEF703/CVC26 703 New South Wales
|
Hyperno_1979
Advanced Member Username: Hyperno_1979
Post Number: 730 Registered: 12-2005
| Posted on Saturday, August 30, 2008 - 6:30 am: |
|
Cobra/Uniden Mic Wiring is: 4 Pin: Pin #1 ~ Shield Pin #2 ~ Audio Pin #3 ~ Transmit Pin #4 ~ Receive And also for 5 pin: Pin1=Audio Pin2=Shield Pin3=Receive Pin4=Switching Wire Pin5=Transmit Standard JCD 201M Wiring: PIN #1 = SHIELD ~ SHIELD / MIC - PIN #2 = BROWN ~ AUDIO / MIC + PIN #3 = WHITE ~ COMMON PIN #4 = GREEN ~ PTT PIN #5 = BLACK ~ CH UP PIN #6 = YELLOW ~ CH DOWN PIN #7 = BLUE ~ CH COMMON PIN #8 = RED ~ V + Supply to Mic Thanks to Lonnie for all the info. Hope this gets you on air. CEFFFCEF Bob CEF703/CVC26 703 New South Wales
|