Copper Talk » Ask The Tech » Radios BASE » Royce ssb base squeal « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

619
Intermediate Member
Username: 619

Post Number: 111
Registered: 12-2001
Posted on Saturday, August 13, 2005 - 2:34 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

Can some one tell me what the cause may be . I get reports that on side band of a intermittent squeal. but on AM there is none, thanks. I have a royce 642 base with a hand held d-104.
Top of pagePrevious messageNext messageBottom of page Link to this message

Kid_vicious
Intermediate Member
Username: Kid_vicious

Post Number: 498
Registered: 9-2004
Posted on Saturday, August 13, 2005 - 8:52 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

your base is old. get a can of contact cleaner and spray it on all the switches and potentiometers while switching them back and forth and turning the knobs back and forth.
this will clean off all the old carbon deposits inside these parts.
try that first and see if it works.
Top of pagePrevious messageNext messageBottom of page Link to this message

619
Intermediate Member
Username: 619

Post Number: 112
Registered: 12-2001
Posted on Saturday, August 13, 2005 - 9:30 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

OK, Thanks I will try that.
Top of pagePrevious messageNext messageBottom of page Link to this message

Hollowpoint445
Advanced Member
Username: Hollowpoint445

Post Number: 659
Registered: 6-2004
Posted on Saturday, August 13, 2005 - 9:34 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

I really doubt it's a dirty pot causing a squeal.

Try turning down the gain on your microphone and turning it up on the radio. And only use enough gain on the mic to get the radio swinging on SSB.

Add Your Message Here
Post:
Username: Posting Information:
This is a private posting area. Only registered users and moderators may post messages here.
Password:
Options: Enable HTML code in message
Automatically activate URLs in message
Action: