| Author |
Message |
    
Tech237
Moderator
Username: Tech237
Post Number: 1067
Registered: 4-2004
| | Posted on Sunday, October 05, 2008 - 7:07 pm: | 
|
OK take an 8 pin RJ-45 plug with the open end towrds you and the springy clip on top - which pin is pin1??
Simon
Tech237
N7AUS
|
Tech291
Moderator
Username: Tech291
Post Number: 521
Registered: 11-2004
| | Posted on Sunday, October 05, 2008 - 7:53 pm: |
|
Simon,
according to my IC-2000 manual,pin#1 would be on the right as you have it situated.wireing for Icom is;
1-+8vdc out
2-freq up/down
3-af detector out
4-ptt
5-gnd(mic)
6-mic(audio)
7-gnd
8-nc
hope this helps.
tech291
cef291/cvc6
kc8zpj |
Tech808
Moderator
Username: Tech808
Post Number: 16150
Registered: 8-2002
| | Posted on Sunday, October 05, 2008 - 7:57 pm: |
|
Simon,
Pin #
Ethernet 10BASE-T
100BASE-TX
EIA/TIA 568A
EIA/TIA 568B or AT&T 258A
1
Transmit +
White with green strip
White with orange stripe
2
Transmit -
Green with white stripe or solid green
Orange with white stripe or solid orange
3
Receive +
White with orange stripe
White with green stripe
4
N/A
Blue with white stripe or solid blue
Blue with white stripe or solid blue
5
N/A
White with blue stripe
White with blue stripe
6
Receive -
Orange with white stripe or solid orange
Green with white stripe or solid
7
N/A
White with brown strip or solid brown
White with brown strip or solid brown
8
N/A
Brown with white stripe or solid brown.
Brown with white stripe or solid brown.
www .nullmodem.com/RJ-45.htm
Hope this help's,
Lon~Tech808
CEF#0808/HAM#001/CVC#0002
Tech808@copperelectronics.com
|
