| Author |
Message |
    
Wildbill
| | Posted on Friday, January 03, 2003 - 1:44 pm: | 
|
Can anyone recommend a good tech that might take on this task, the radio does work it just needs some minor things done to it. Wildbill |
307
| | Posted on Friday, January 03, 2003 - 7:18 pm: |
|
Sure..email me at tech307@copperelectronics.com
307 |
Bigbob
| | Posted on Friday, January 03, 2003 - 8:07 pm: |
|
CAN I RECOMMEND A GOOD TECH?!!Check for one of 307s posts and click on his moniker and send him an e-mail if he can't he may know one. |
CM 3885
| | Posted on Saturday, January 04, 2003 - 9:19 pm: |
|
Hello 307!
Do you know of a good mod for the 3500 NB/ANL circuit to make it more effective? |
Rightwing
| | Posted on Friday, January 10, 2003 - 12:34 am: |
|
hey bill you wanna sell it? email me and lets talk... im looking for one of those . |
307
| | Posted on Friday, January 10, 2003 - 10:01 pm: |
|
The ANL on the 3500 can be aligned better , most that I see that come through here are way off and the ANL works a lot better after an alignment.
307 |
Wildbill
| | Posted on Saturday, January 11, 2003 - 9:30 am: |
|
Right Wing, I think I'll hold onto this one, however I do know of another person that has one, I'll ask him how much he wants for it, that's if he decides to get rid of it. Wildbill |
CM 3885
| | Posted on Monday, January 13, 2003 - 3:20 pm: |
|
307....
The problem i have with mine is the ANL/NB works but i still have too much noise. the RX end of the 3500 is so defined it will pick up everything. I sent it to Jeff Broughton(one of the techs i send my stuff to) up in Mason michigan and he realigned the receiver end to fact. spects but the recevier end is still too noisy. |
Scrapiron63
| | Posted on Monday, January 13, 2003 - 4:33 pm: |
|
The 3500 has such a sensitive receive, it gets the noise also. I run my ANL and NB plus turn the RF gain back to about 3 o'clock when its noisy. Even like that it will still 'hear' better than most radios. When its quite, I run everything wide open. scrapiron |
|
