Copper Talk » Ask The Tech » Microphone Wiring » Kenwood MC-60A « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Unit199
Intermediate Member
Username: Unit199

Post Number: 486
Registered: 8-2003


Posted on Wednesday, June 13, 2007 - 5:15 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)
Can anyone tell me what wiring would be for Magnum DeltA force???? ALL HELP WILL BE GREATLY APPRECIATED!!!!!!
HARVE
UNIT199
CEF210
CVC18
KB0YVK
Top of pagePrevious messageNext messageBottom of page Link to this message

Tech808
Moderator
Username: Tech808

Post Number: 13889
Registered: 8-2002


Posted on Wednesday, June 13, 2007 - 8:38 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)
Harve,

MC-60 Microphone wiring:

Here is the pin designations for the MC-60
(from its manual, of course)

Pin 1 - Mic audio out (+)
Pin 2 - PTT (+)
Pin 3 - DOWN switch
Pin 4 - UP switch
Pin 5 - +8VDC from radio
Pin 6 - no connection
Pin 7 - Audio ground (-)
Pin 8 - PTT & UP/DOWN common (Note: not grounded!)

Delta Force Pin designations:

Pin 1 - Audio
Pin 2 - RX
Pin 3 - TX
Pin 4 - Up/Dn w/22k
Pin 5 - Gnd
Pin 6 - + 13.8vdc

Hope this help's,
Lon ~ Tech808 ~ N9CEF
CEF#808 ~ CEF HAM#33 ~ CVC#002
Tech808@copperelectronics.com

Add Your Message Here
Post:
Username: Posting Information:
This is a private posting area. Only registered users and moderators may post messages here.
Password:
Options: Enable HTML code in message
Automatically activate URLs in message
Action: