| Author |
Message |
    
Jyd
| | Posted on Thursday, January 10, 2002 - 12:38 pm: | 
|
i just ordered a vr-9000 and had a few questions,after converted to 11 meter what is the frequency range? also you say its like a 88 galaxy,tune up specs are the same for a 99 and 88 but they convert diffrent to 11 meter.1 says for the 99 cut green wire and plug the plug in and the other says remove a small wire from the bottom of the board and make sure there is no solder touching the to pins then plug the plug in which one is like the vr-9000 to convert.thanks alot. |
Tech181
| | Posted on Thursday, January 10, 2002 - 9:36 pm: |
|
Jyd,
To convert the VR9000 look for 4 resistors soldered in a criss-cross pattern on the solder side of the board. Remove these resistors.
Freq range should be the same as a Galaxy 88 25.615 - 28.305. |
Jyd
| | Posted on Thursday, January 10, 2002 - 9:39 pm: |
|
i ordered one and i think i am going to do that is in the subscriber to. |
|
