| Author |
Message |
    
Cbblackbeard
Intermediate Member
Username: Cbblackbeard
Post Number: 222
Registered: 12-2003
| | Posted on Sunday, November 25, 2007 - 4:23 pm: | 
|
What size power supply would be best to power a 10 meter radio such as a Connex 3300HP or a General Lee?
Moderator Note!
For a helpful guide on what size power supply you will need CLICK HERE > WHICH POWER SUPPLY DO YOU NEED? |
Johhn
Intermediate Member
Username: Johhn
Post Number: 105
Registered: 8-2007
| | Posted on Sunday, November 25, 2007 - 5:59 pm: |
|
I use a PS14KX .I run a rci 2950 dx & a kl60,
I bought the 14 so I could run a kl 200-p,
And still have room for more power.
The Rci uses a 6 amp fuse .
The kl60 uses a 5 amp fuse. |
Patzerozero
Senior Member
Username: Patzerozero
Post Number: 4021
Registered: 7-2004
| | Posted on Sunday, November 25, 2007 - 9:10 pm: |
|
there are a lot of people that claim to see 50+ watts from a general lee....better too big then too small. i'd suggest at least 15 amps continuous, if not bigger. i'd personally get the biggest i could afford, in the 35+ amp continuous range....you never know when that 50 watt radio will turn into a new 150 watter  . |
Hyperno_1979
Advanced Member
Username: Hyperno_1979
Post Number: 505
Registered: 12-2005
| | Posted on Saturday, December 08, 2007 - 6:48 am: |
|
I agree there young Patrick. At the least use a 40a supply. They are as cheap as chips at the moment and will easily run a 100w kicker if it appears in the shack in the future.
CEFFFCEF
Bob
CEF703/CVC26
269 Hunter Valley
NOT allowed to hold a passport....
|
