| Author |
Message |
    
Johnhenre
Intermediate Member
Username: Johnhenre
Post Number: 102
Registered: 1-2004
| | Posted on Wednesday, May 28, 2008 - 6:03 pm: | 
|
ANYONE HAVE THE WIRING COLORS THAT HOOKS UP TO THE CONTROLLER THE ONES THAT COME OUT OF THE ROTOR ARE IN ONE JACKET NO NUMBERS. BUT THE CONTRLLER HAS 1---8. BOB |
Captian_radio
Intermediate Member
Username: Captian_radio
Post Number: 397
Registered: 9-2004
| | Posted on Wednesday, May 28, 2008 - 10:02 pm: |
|
What ever one you hook up to the control you hook up to the same on the rotor.If you say put red on #1 on control you put the same red on #1 on the rotor and so on.You should be able to find the wiring codes on Google.
Bob
Robert L. Spicer The days of radio are just beginning!
|
Johnhenre
Intermediate Member
Username: Johnhenre
Post Number: 104
Registered: 1-2004
| | Posted on Thursday, May 29, 2008 - 9:12 am: |
|
THERES NO TERMINAL STRIP ON THE ROTOR UNLESS ITS INSIDE THE ROTOR ITSELF ALL EIGHT WIRES COME OUT OF THE ROTOR IN ONE JACKET THOUGH A RESTAINING CLAMP JUST DO'NT WANT TO OPEN IT UP TO SEE IF THERE ARE ONE |
Perrym1962
Member
Username: Perrym1962
Post Number: 53
Registered: 11-2002
| | Posted on Saturday, May 31, 2008 - 11:16 am: |
|
I took the terminal strip off of an extra I have and here goes. #1 there is a naked red wire by itself attached to #1. #2 blue wire.#3 there are 2 naked red wires together that go to #3. #4 black. #5 white. #6 naked green wire. Hope this helps. Maybe if they did not reconfigure the naked wires. The naked wires I am speaking of are tiny. Perry..Also I noticed you said yours is 8 wire. I have 2 HD73 rotors and mine are both 6 wire, so this may not help you... |
Train_man
Junior Member
Username: Train_man
Post Number: 41
Registered: 10-2007
| | Posted on Saturday, August 16, 2008 - 12:44 pm: |
|
On the bottom of the rotor,there should be a black cover with 2 screws. Remove those screws to access the terminals.
|
Tech808
Moderator
Username: Tech808
Post Number: 15991
Registered: 8-2002
| | Posted on Saturday, August 16, 2008 - 6:25 pm: |
|
Johnhenre,
On my ALLIANCE Dual Speed Controller's for my HD-73's it is:
#1 ~ RED
#2 ~ BLACK
#3 ~ BROWN
#4 ~ BLUE
#5 ~ GREEN
#6 ~ YELLOW
And #10 WIRE from GROUND LUG to GROUND
Lon~Tech808
CEF#0808/HAM#001/CVC#0002
Tech808@copperelectronics.com
|
Train_man
Junior Member
Username: Train_man
Post Number: 42
Registered: 10-2007
| | Posted on Sunday, August 17, 2008 - 1:37 am: |
|
BTW, as stated earlier, it doesn't matter what wires go where, as long as they are the same on both ends.
|
