Copper Talk » Ask The Tech » Microphone Questions » Magnum 257 Mic « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Starface
Senior Member
Username: Starface

Post Number: 2139
Registered: 1-2005


Posted on Monday, September 29, 2008 - 10:33 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

I was doing a google search on radio mic's this evening and came across this mod for the Magnum 257 Mic.

The Magnum 257's stock microphone is actually a power microphone and there is an adjustable potentiometer inside the microphone that can be adjusted for more microphone gain. I opened up the stock microphone and sure enough there was a pot inside. I adjusted it to maximum and then tested out the radio again and this time everyone said that my voice was LOUD and clear.

Hope this helps out those that own a Magnum 257.
George
KI4NBE
CEF#Ø476
HAM#Ø181
CVC#ØØ14
Top of pagePrevious messageNext messageBottom of page Link to this message

Fde
Junior Member
Username: Fde

Post Number: 18
Registered: 6-2008
Posted on Tuesday, September 30, 2008 - 3:14 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

I did that on mine about a month ago when I got it,made all the difference in the world.The mic that came with the radio looked different than the picture too,it`s a better looking bigger mic.I really like the radio,just wish the receive was a little better.
Freddie
Top of pagePrevious messageNext messageBottom of page Link to this message

Hotwire
Senior Member
Username: Hotwire

Post Number: 2635
Registered: 1-2005


Posted on Wednesday, October 01, 2008 - 10:49 am:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

Freddie, What do you wish was better about the receiver in the Magnum 257? Some owners rank the 257 up there with the HR2510 and Lincoln rigs.
Kenny
CEF491
Reading the mail around Indianapolis Indiana!

Top of pagePrevious messageNext messageBottom of page Link to this message

Hyperno_1979
Advanced Member
Username: Hyperno_1979

Post Number: 753
Registered: 12-2005


Posted on Thursday, October 02, 2008 - 5:35 am:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

I have the 357 the 257's big brother and cannot fault the receive. I rate it better than my IC 725.
CEFFFCEF
Bob
CEF703/CVC26
703 New South Wales
Top of pagePrevious messageNext messageBottom of page Link to this message

Fde
Junior Member
Username: Fde

Post Number: 20
Registered: 6-2008
Posted on Friday, October 03, 2008 - 10:39 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

I`ve hooked it up on my base antenna and it just doesn`t hear as well as my Washington or a 148.Maybe I need to find a good tech to tune up the receive,it is good to know it`s supposed to be better.
Freddie
Top of pagePrevious messageNext messageBottom of page Link to this message

Hotwire
Senior Member
Username: Hotwire

Post Number: 2643
Registered: 1-2005


Posted on Saturday, October 04, 2008 - 3:38 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

Well, if your comparing it to a President Washington or Cobra 148 then no wonder! I beleive it is the 8719 pll/chassis if my memoery is correct that is second to none when it comes to great well designed receiver.
Regardless you have 3 of the best CB/export sidebanders around! I doubt the 257 needs a tune up. Your ears are just used to the low noise sensitivity of the Washington and the abilty of the 148 to snatch up signals from the hash and trash!
OH YEAH, I just added a Washington to my collection not long ago also! I'll never part with it.....unless I found a youngster who is really interested in cb radio and should know how a quality radio is supposed to perform.
Kenny
CEF491
Reading the mail around Indianapolis Indiana!

Add Your Message Here
Post:
Username: Posting Information:
This is a private posting area. Only registered users and moderators may post messages here.
Password:
Options: Enable HTML code in message
Automatically activate URLs in message
Action: