Author |
Message |
Tech237
Moderator Username: Tech237
Post Number: 1067 Registered: 4-2004
| Posted on Sunday, October 05, 2008 - 7:07 pm: |
|
OK take an 8 pin RJ-45 plug with the open end towrds you and the springy clip on top - which pin is pin1?? Simon Tech237 N7AUS
|
Tech291
Moderator Username: Tech291
Post Number: 521 Registered: 11-2004
| Posted on Sunday, October 05, 2008 - 7:53 pm: |
|
Simon, according to my IC-2000 manual,pin#1 would be on the right as you have it situated.wireing for Icom is; 1-+8vdc out 2-freq up/down 3-af detector out 4-ptt 5-gnd(mic) 6-mic(audio) 7-gnd 8-nc hope this helps. tech291 cef291/cvc6 kc8zpj |
Tech808
Moderator Username: Tech808
Post Number: 16150 Registered: 8-2002
| Posted on Sunday, October 05, 2008 - 7:57 pm: |
|
Simon, Pin # Ethernet 10BASE-T 100BASE-TX EIA/TIA 568A EIA/TIA 568B or AT&T 258A 1 Transmit + White with green strip White with orange stripe 2 Transmit - Green with white stripe or solid green Orange with white stripe or solid orange 3 Receive + White with orange stripe White with green stripe 4 N/A Blue with white stripe or solid blue Blue with white stripe or solid blue 5 N/A White with blue stripe White with blue stripe 6 Receive - Orange with white stripe or solid orange Green with white stripe or solid 7 N/A White with brown strip or solid brown White with brown strip or solid brown 8 N/A Brown with white stripe or solid brown. Brown with white stripe or solid brown. www .nullmodem.com/RJ-45.htm Hope this help's, Lon~Tech808 CEF#0808/HAM#001/CVC#0002 Tech808@copperelectronics.com
|