Copper Talk » Ask The Tech » General Technical Questions » Finals in a older president washington « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Guardian
Member
Username: Guardian

Post Number: 74
Registered: 5-2004
Posted on Saturday, November 29, 2008 - 8:48 am:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

Hello i have a older president washington base and i was wanting to find out the finals that are in it when i look all i see is 3 1309's and 2 to 3 1419's now can they be changed to something else and if so what. Thanks Guys
Top of pagePrevious messageNext messageBottom of page Link to this message

Hotwire
Senior Member
Username: Hotwire

Post Number: 2684
Registered: 1-2005


Posted on Saturday, November 29, 2008 - 1:47 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

1309's or 1419's are the audio output transistors.
What your looking for is RF output transistors and they are towards the back of the board or the rear of the radio located in the center.
The driver should be labeled 2166 or 1306 and the final should be labeled 2312 or 1969. The numbers could have the letters sc before them, just depends.
Off the top of my head I can't think of any other driver-final combinations for that type of radio.
Kenny
CEF491
Reading the mail around Indianapolis Indiana!

Top of pagePrevious messageNext messageBottom of page Link to this message

Guardian
Member
Username: Guardian

Post Number: 75
Registered: 5-2004
Posted on Monday, December 01, 2008 - 2:33 am:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

Thanks i have one more question can u tell me the mod for utting extra freqs in that radio it has the 858 pll chip . and the freq list if u know where i canget it . some one did a mod for it using the cb/pa button and i am not sure where it goes the mod seems to start on ch. 8 and goes up 1-7 are normal ch.
Top of pagePrevious messageNext messageBottom of page Link to this message

Captian_radio
Intermediate Member
Username: Captian_radio

Post Number: 477
Registered: 9-2004
Posted on Monday, December 01, 2008 - 12:57 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

Probably has 2SC1306 driver and 2SC1307 final,and most likely the mod that was done was just the basic one, do a Google search for PLL 858 mods it will show you what you are looking for.
Bob VE1CZ/CEF451
Robert L. Spicer The days of radio are just beginning!
Top of pagePrevious messageNext messageBottom of page Link to this message

Guardian
Member
Username: Guardian

Post Number: 76
Registered: 5-2004
Posted on Monday, December 01, 2008 - 3:42 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

now can i use a 2312 with a 1306 or do i need to use the 2166 with it .

Add Your Message Here
Post:
Username: Posting Information:
This is a private posting area. Only registered users and moderators may post messages here.
Password:
Options: Enable HTML code in message
Automatically activate URLs in message
Action: