| Author |
Message |
    
Fishbones182
New member
Username: Fishbones182
Post Number: 3
Registered: 4-2009
| | Posted on Friday, April 24, 2009 - 9:35 pm: | 
|
who makes coppers rg8,and the rg 213 i know about the lmr 400 that copper sells how flexiable is that. I plan on a beam project for vhf weak signal work. Also what are the db losses for the rg 8 and rg 213 at 150mhz thank you. |
Nightlinks
Member
Username: Nightlinks
Post Number: 59
Registered: 1-2009
| | Posted on Saturday, April 25, 2009 - 9:20 am: |
|
The 213/U #3780 is made by JSC Wire & Cable printed here on the coax.
CEF#1021
|
Tech808
Moderator
Username: Tech808
Post Number: 16816
Registered: 8-2002
| | Posted on Saturday, April 25, 2009 - 9:51 am: |
|
Fishbones182,
Nightlinks is correct.
The RG-8 and RG-213 is made by: JSC
The Altelicon CA-400 Cable is made by: Altelicon
Same specs but (CHEAPER) than LMR400 
Lon ~ Tech808
N9CEF ~ EN50mk
|
Fishbones182
New member
Username: Fishbones182
Post Number: 5
Registered: 4-2009
| | Posted on Saturday, April 25, 2009 - 11:13 am: |
|
thanks for the info. how flexable is the alteclicon 400 could that be used with a rotor or would i need patch cables for attachment to the beams. |
Tech808
Moderator
Username: Tech808
Post Number: 16819
Registered: 8-2002
| | Posted on Saturday, April 25, 2009 - 12:23 pm: |
|
Very stiff as it is a Solid Core coax.
Lon ~ Tech808
N9CEF ~ EN50mk
|
Fishbones182
New member
Username: Fishbones182
Post Number: 6
Registered: 4-2009
| | Posted on Saturday, April 25, 2009 - 12:41 pm: |
|
ok great thanks for your help with the info i was wanting. |
