Copper Talk » Ask The Tech » Amplifiers » 12 6lf6 tube amp, What is it? « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

User63
New member
Username: User63

Post Number: 1
Registered: 10-2006
Posted on Sunday, April 26, 2009 - 2:58 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

I picked up an amp with 12 tubes. 1 driving 4 driving 7. It is gold, 4 tuning knobs across the top. meter, 4 switches, meter across the bottom. On the back it has Radio in 3-10 watts, exciter in 50-200 watts, antenna, radio exciter switch and a tune knob. It has separate transformer. Does anyone know what this is and have schematics or manual? Any help would be appreciated. Thanks
Top of pagePrevious messageNext messageBottom of page Link to this message

Bruce
Senior Member
Username: Bruce

Post Number: 5011
Registered: 9-2003


Posted on Sunday, April 26, 2009 - 4:46 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

You might post a photo of it ... sadly there are many amps built by fly by night places long lost to history.

Now if your a ham you might be able to use it on 10 meters but most of those amps were TVI generators .....
On 6 since 66
Top of pagePrevious messageNext messageBottom of page Link to this message

User63
New member
Username: User63

Post Number: 2
Registered: 10-2006
Posted on Sunday, April 26, 2009 - 10:14 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

Here is a pic. I hope it uploads this time.
Top of pagePrevious messageNext messageBottom of page Link to this message

Tech808
Moderator
Username: Tech808

Post Number: 16825
Registered: 8-2002


Posted on Monday, April 27, 2009 - 7:24 am:   Edit Post Delete Post    Move Post (Moderator/Admin Only)



NOTE!
This picture was Reduced 50% to fit in the Copper Forum by using the FREE Pic Resizer below.

Free Pic Resizer
Lon~Tech808
N9CEF~EN50mk
CEF#0808~CVC#0002


Top of pagePrevious messageNext messageBottom of page Link to this message

Bruce
Senior Member
Username: Bruce

Post Number: 5013
Registered: 9-2003


Posted on Monday, April 27, 2009 - 7:34 am:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

Someone on the forum might remember it that's your best bet.

Looking at it it almost looks home made ....

A very nice job if that's the case ...
On 6 since 66
Top of pagePrevious messageNext messageBottom of page Link to this message

Moderator136
Moderator
Username: Moderator136

Post Number: 1463
Registered: 4-2005
Posted on Monday, April 27, 2009 - 9:03 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

Well it looks like one i seen back around mid 1970's . To match a Golden eagle. If its the one im thinking about it had power supply problems.

Transformer went bad in a short time. To be honest im not shure. Maybe someone will know?
Good luck
Hal~Moderator136~KCØSVC
CEF#0136/CEF HAM#23 ~ CVC#0004
Top of pagePrevious messageNext messageBottom of page Link to this message

Scrapiron63
Advanced Member
Username: Scrapiron63

Post Number: 855
Registered: 12-2001
Posted on Tuesday, April 28, 2009 - 1:59 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

I've never seen one like but it looks like it would be a badboy. Nice the way it's set up with the low or high power input. On the exciter position it probably turns off the five driver tubes and the input goes right to the seven finals. You can run a cb type radio in it or a 100 watt radio. It would be nice behind one of these high powered Galaxy or Rangers.

D & A made a two piece called a Warrior but the power supply for it matched the amplifier, and it ran 16 tubes.
Maco also made a two piece but it had Maco KW on the front and it ran 8950s or 2057s.
Palomar, Drake and several more made two piece units but they didn't look like that one.

Since that one doesn't have a name on it, it was probably made by a company that didn't make very many or that was an early production model.
There were a lot of people making amplifers back in the day.
The big question is, how does it work?
Top of pagePrevious messageNext messageBottom of page Link to this message

User63
New member
Username: User63

Post Number: 2
Registered: 10-2006
Posted on Thursday, April 30, 2009 - 12:43 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

Thanks for the responses. I think I found out what it is. I was told it looks like a Golden Falcon made by Andy Anderson. Probably 1500 watts. To big for my use. Probably trade it off. Thanks again.

Add Your Message Here
Post:
Username: Posting Information:
This is a private posting area. Only registered users and moderators may post messages here.
Password:
Options: Enable HTML code in message
Automatically activate URLs in message
Action: