| Author |
Message |
    
Five
Junior Member
Username: Five
Post Number: 14
Registered: 7-2009
| | Posted on Sunday, August 16, 2009 - 3:09 am: | 
|
I have a magnum 6 pin to 4 pin cobra/galaxy mic adapter I bought from copper, my question is will it work on the magnum 257? I am hesitant to try it because of the power on pin 6 of the 257 radio. I have a RD-104 I was wanting to try on this radio if the adapter would work. I know the radio already has a power mic I just wanted to know if it would work? Thanks.... |
Train_man
Member
Username: Train_man
Post Number: 62
Registered: 10-2007
| | Posted on Sunday, August 16, 2009 - 12:25 pm: |
|
Yes, it will work.
|
Mscott1212
Junior Member
Username: Mscott1212
Post Number: 41
Registered: 12-2006
| | Posted on Sunday, August 16, 2009 - 3:14 pm: |
|
you should make sure that it is the one for the magnum and not the ranger style 6pin to 4 pin adapter. I made sure I bought the magnum style one when I used it on my 257 and it worked very good with an 636l mic.
73's
Cef#1011
Ham#294
From the Great Lakes State
|
Five
Junior Member
Username: Five
Post Number: 15
Registered: 7-2009
| | Posted on Sunday, August 16, 2009 - 8:06 pm: |
|
yes I bought both of them and neither one was marked. They both look the same so I used my RCI-2970 to figure out which one went to it and marked them both. I was still hesitant to use the Magnum adapter on the 257 though only because grounding pin 6 could kill the radio... Thanks... |
