| Author |
Message |
    
Missie
Junior Member
Username: Missie
Post Number: 46
Registered: 10-2006
| | Posted on Monday, October 25, 2010 - 1:46 pm: | 
|
radio transmits great but receives channel 20 on channel 1-32 and receives fine 33-40 also was motor boating on 16-19 in receive mode but here again it was receiving 20 on all of these channels.
any one |
Tech858
Moderator
Username: Tech858
Post Number: 326
Registered: 10-2007
| | Posted on Monday, October 25, 2010 - 3:01 pm: |
|
You say it transmits great , now the question is does it TX on the correct channels ?
Tech858/Jim
CEF#0858 ~ CEF HAM#0230
CVC#0116 ~ MM0TXO
|
Missie
Junior Member
Username: Missie
Post Number: 47
Registered: 10-2006
| | Posted on Monday, October 25, 2010 - 4:41 pm: |
|
yes it dose! all the channels I checked all worked right. |
Tech858
Moderator
Username: Tech858
Post Number: 327
Registered: 10-2007
| | Posted on Tuesday, October 26, 2010 - 3:28 pm: |
|
Check for dry solder joints around the VCO and RX mixer area on the board , worth a try before having to check all the voltages are freqs are correct in there .
Tech858/Jim
CEF#0858 ~ CEF HAM#0230
CVC#0116 ~ MM0TXO
|
Missie
Junior Member
Username: Missie
Post Number: 49
Registered: 10-2006
| | Posted on Wednesday, October 27, 2010 - 12:25 pm: |
|
thanks tech 858 I soldered taped and turned back and forth VCO it now receives on all channels! but now I lost all transmit, red light comes but no out put on meter or external meter any other ideas. |
