| Author |
Message |
    
Stone66
New member
Username: Stone66
Post Number: 3
Registered: 7-2014
| | Posted on Monday, July 14, 2014 - 11:04 pm: | 
|
At the risk of sounding dumb... My Maco V58 instructions say to make the antenna 249" for 26.0 MHz and 248" for 27.0mhz. The CB channels run from 26.965 to 27.405. So do I split the difference and make it 248 1/2"?? I know there are only 3 channels in the 26mhz range, but still??? |
Milkman21218
Advanced Member
Username: Milkman21218
Post Number: 601
Registered: 1-2004
| | Posted on Tuesday, July 15, 2014 - 1:43 am: |
|
If it were me I think that I would go with the 248". To cover the 37 channels.
Izzy
CEF#502
|
Dale
Senior Member
Username: Dale
Post Number: 2102
Registered: 12-2002
| | Posted on Thursday, July 17, 2014 - 10:35 pm: |
|
i agree .start at 248 then adjust the wire arround the ring to even both ends of the 11 meter band
dale/a.k.a.hotrod
cef426
cvc#64
454 [dx numbers]
38lsb
|
Stone66
New member
Username: Stone66
Post Number: 4
Registered: 7-2014
| | Posted on Sunday, July 20, 2014 - 10:24 pm: |
|
Thanx Guys!!! |
