| Author |
Message |
    
Ramrezhe
New member
Username: Ramrezhe
Post Number: 1
Registered: 3-2018
| | Posted on Tuesday, March 20, 2018 - 10:39 am: | 
|
I have an AT-6666 and I want to wire an RD104E mic to this radio, if possible add 2 push buttons and keep channels change feature on the mic, anybody has a diagram to do this?
Thank You |
Mdyoungblood
New member
Username: Mdyoungblood
Post Number: 6
Registered: 4-2011
| | Posted on Saturday, March 24, 2018 - 8:48 pm: |
|
It's not that easy to wire up the mic for the up/down switches, it would take mimicking the stock microphone with the diodes and resistors used in the circuit plus the fact it isn't a lot of room for the switches. now for the wiring of the mic itself,
pin 1 is audio/white
pin 2 n/c
pin 3 is PTT/red
pin 4 n/c (would be for the up/down switch setup)
pin 5 ground/shield and blue
pin 6 n/c (12v+ used with the up/down switch setup
Hope this helped.
3's
Greg |
Lou
Junior Member
Username: Lou
Post Number: 27
Registered: 7-2017
| | Posted on Friday, September 25, 2020 - 4:54 pm: |
|
Thanks Greg i will give it a try I will let every one no how it works. |
Dirtyjob
New member
Username: Dirtyjob
Post Number: 4
Registered: 12-2012
| | Posted on Wednesday, April 07, 2021 - 6:30 pm: |
|
he never let us know  |
Scarecrow
New member
Username: Scarecrow
Post Number: 7
Registered: 1-2021
| | Posted on Wednesday, April 07, 2021 - 8:44 pm: |
|
Seems to happen a lot. LOL |
Scarecrow
New member
Username: Scarecrow
Post Number: 8
Registered: 1-2021
| | Posted on Wednesday, April 07, 2021 - 8:45 pm: |
|
Seems to happen a lot. LOL |
