| Author |
Message |
    
Chosen_one
New member
Username: Chosen_one
Post Number: 5
Registered: 8-2018
| | Posted on Saturday, January 25, 2020 - 1:59 am: | 
|
Hello,
Other than nailing the walls in the roof with a nail and a plastic hoop to hold the coax. What would be another method of holding the coax against a wall for blowing winds? I thought about running the coax around the roof wall holding it with epoxy but I'm not sure if it would hold good.
CEF #1021
|
Tech237
Moderator
Username: Tech237
Post Number: 1955
Registered: 4-2004
| | Posted on Tuesday, December 29, 2020 - 7:40 am: |
|
When I have external antennas, I run my coaxes inside pvc pipe with a small hole drilled every 6 inches or so on the bottom for drainage. The pipe slopes downwards away from where it enters the building. I have a junction box about every 10ft to aid in pulling new cables thru. The pipe itself is Saddle clmaped to the wall etc.
Tech237
N7AUS
God made me an athiest, who are you to question his wisdom?
|
Tech833
Moderator
Username: Tech833
Post Number: 2483
Registered: 8-2002
| | Posted on Sunday, January 03, 2021 - 6:06 pm: |
|
Use the straps for holding conduit against a wall. Your local home improvement store will have them.
Your radio 'Mythbuster' with Copper Electronics since 1998
|
