Author |
Message |
Centurion
New member Username: Centurion
Post Number: 2 Registered: 7-2020
| Posted on Wednesday, August 05, 2020 - 11:14 am: |
|
Trying to get this old radio back up and running. It has very weak receive and no transmit according to internal and external meters receive is so weak it doesn't register on meter can only hear using headphones. Key circuit works transmit relays work but no signal going out. I am going to work on Recieve first then go from there need to know where to start. I do not have access to a scope or analyzer only have Simpson multi meter and my External meter/antenna tuner if this can't be done with what i have let me know and i will shelve it till i can send it to someone for repair but would rather fix it myself! |
Centurion
New member Username: Centurion
Post Number: 3 Registered: 7-2020
| Posted on Wednesday, August 05, 2020 - 7:27 pm: |
|
So far on my own found a corroded Transistor C945/A027X when i touched the transistor receive changed slightly I touched it again and 2 of the connectors broke and receive went away completely i have some parts but none to match this is there a replacement for that part with a different number this radio from best i can tell is still factory stock? |
Charliebrown
Advanced Member Username: Charliebrown
Post Number: 725 Registered: 10-2002
| Posted on Thursday, August 06, 2020 - 8:30 am: |
|
I did an ECG cross reference parts look up in my old parts book. I cant find a replacement so far. You might want to Google an NTE cross reference . |
Centurion
New member Username: Centurion
Post Number: 4 Registered: 7-2020
| Posted on Friday, August 07, 2020 - 1:36 am: |
|
Thanks Charlie Brown i found some cross references don't have any of those either but at least i know what will work now! |
Centurion
New member Username: Centurion
Post Number: 5 Registered: 7-2020
| Posted on Monday, August 10, 2020 - 12:24 am: |
|
I stole a transistor out of a Montgomery Ward 702 Base parts chassis not same nut it has all my recieve functions working Tone Squelch Volume and clarifier on SSB now to get Transmit and meters working Key circuit Relay activates but no signal going out to external meter any suggestions will be greatly appreciated! |