| Author |
Message |
    
Sofkow
| | Posted on Wednesday, February 27, 2002 - 6:40 pm: | 
|
My radio is hitting a 3 watt dead key and swings to 13. Will their be a problem hooking up the Palomar 250 to that? If so...could anyone reccomend the proper amp for my needs?
Thanks. |
307
| | Posted on Wednesday, February 27, 2002 - 9:30 pm: |
|
Actually that is the ultimate setting. It will sound great.
307 |
Warlock
| | Posted on Wednesday, February 27, 2002 - 9:35 pm: |
|
With that setting I'd recommend running the Pal 250 in low and medium only. In high position your amp's carrier will be at or over 50% of the total power and could cause distortion or "muffling" along with much heat.
That setting of your radio would be better suited to a Pal 400, Cobra 450xl, or XForce 200hd. |
Jyd
| | Posted on Thursday, February 28, 2002 - 8:50 am: |
|
texas star high drive 350 |
Warlock
| | Posted on Thursday, February 28, 2002 - 9:24 pm: |
|
A 3w carrier into a TS 350 HD will yeild around a 200w carrier, a bit hefty for maximum clarity and will run hot. |
Hell458
| | Posted on Wednesday, April 03, 2002 - 11:26 pm: |
|
i have a super star 3900 @1 1/2 watts into a texas star 350hdv .i'm only getting 175 only swinging close to 275
what can i do to get the max out of the texas star. |
Warlock
| | Posted on Thursday, April 04, 2002 - 7:40 am: |
|
You're getting what you should get in "swing", too much in carrier. The carrier should be 1/4 or 1/3 of the peak. Back your radio down so the carrier is around 100w. |
|
