Copper Talk » Ask The Tech » Amplifiers » Modulator with no swing « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Straycat
Posted on Sunday, March 24, 2002 - 1:03 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

Anyone-- I have a comet/tnt modulator with variable power that runs a pair of mrf455's. It works fine at low setting. With 2 watts into it it swings to 40. The problem is that if I turn the variable all the way up it will key 90 but won't swing. Is it not designed to swing from there ? Is there a component within the box that might be out causing it not to swing ? Before you tell me that this brand of modulator is not the best belive me I know. At low setting it sets off my neighbor's house alarm so I know it's a little harmonic generator. Any ideas ? Thanks
Top of pagePrevious messageNext messageBottom of page Link to this message

Taz
Posted on Monday, March 25, 2002 - 8:45 am:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

ANSWER ME THIS.


IF YOUR SITTING STILL IN YOUR NEW DODGE VIPER ( I KNOW ITS JUNK ITS ALL I COULD THINK OF J/K) IT WOULD BE EASY TO BURN OUT RIGHT?


OK NO LETS SAY YOUS GOING ABOUT AS FAST AS THE CAR WILL GO YOU CAN PEEL OUT ANYMORE CAUSE THE MOTOR ISNT THAT BIG.


ITS A POOR EXAMPLE BUT IT STILL IS ONE
Top of pagePrevious messageNext messageBottom of page Link to this message

Inspector
Posted on Monday, March 25, 2002 - 1:46 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

Try lowering your drive wattage from 2 down to 1 Watt or less. Make sure the radio has good foreward swing as well.
Top of pagePrevious messageNext messageBottom of page Link to this message

Warlock
Posted on Tuesday, March 26, 2002 - 5:28 am:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

Stray, the TnT super mods were notorious for matching and swr problems. What inspector said is correct and will help, but if you want a 2 transistor modulator that works well, look at a XForce X80 or something similar.
The TnTSM's were not intended for the variable to be run wide open, sadly when you don't it has terrible input SWR! Go figure.
Top of pagePrevious messageNext messageBottom of page Link to this message

Straycat
Posted on Monday, March 25, 2002 - 8:51 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

OK Inspector I'll keep the drive low. Thanks. I used to have an older TNT that had the same pills I and it would swing to 175. Thanks again
Top of pagePrevious messageNext messageBottom of page Link to this message

Straycat
Posted on Tuesday, March 26, 2002 - 8:52 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

Thanks Warlock. I was hoping I could get a response from you as well. I have seen your previous responses to other posts and know you have tech ability. Thanks
Top of pagePrevious messageNext messageBottom of page Link to this message

Jyd
Posted on Thursday, March 28, 2002 - 9:07 am:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

what kind of radio do you use with it?
Top of pagePrevious messageNext messageBottom of page Link to this message

Straycat
Posted on Thursday, March 28, 2002 - 2:18 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

I am using a Galaxy 33 that keys 2 and swings to 20. The modulator has a pair of MRF455's. The dead key I get is normal for two 455's, but, I have other amps that dead key their pill value and swing from there.

Add Your Message Here
Post:
Username: Posting Information:
This is a private posting area. Only registered users and moderators may post messages here.
Password:
Options: Enable HTML code in message
Automatically activate URLs in message
Action: