| Author |
Message |
    
Monster
| | Posted on Thursday, March 28, 2002 - 9:02 am: | 
|
How do I disable the noise blanker switch on my radio? I want the noise blanker to be permanently on, and I want to use the switch on the front of the radio to turn off and on a roger beep. I'm not a fan of drilling holes in a radio chassis-front or back. |
Sonoma
| | Posted on Friday, March 29, 2002 - 6:27 am: |
|
on the back of the switch check with a ohm meter to find out which 2 wires go together to turn on the nb.disconnect them from the switch and solder them together and if there are any others there check them also with a meter and see if they have to be connected and do whichever is needed.hope this helps a little. |
Jyd
| | Posted on Thursday, March 28, 2002 - 5:07 pm: |
|
put a switch in the back of your radio by the coax connector, that way you dont see it and still have your noise blanker. |
|
