| Author |
Message |
    
Benny_Blanco
| | Posted on Sunday, September 01, 2002 - 12:11 pm: | 
|
I just brought a Palomar 250 Gold. How much current does this amp require, also what size fuze do I need in case I need a replacement? I'm going to change the power leads to 12awg copper stranded, and don't want to fry anything.
BENNY,
AMP Draw (Continuous) 17 Amps)
Amp Draw (Maximum) 21 Amps
Fuse: SFE-20 AMP
Hope this helps!
Lon
tech808
|
Benny_Blanco
| | Posted on Sunday, September 01, 2002 - 4:23 pm: |
|
Thanx Tech808!
You are welcome!
Lon
tech808 |
Bigbob
| | Posted on Sunday, September 01, 2002 - 11:16 pm: |
|
Tech 808 whats the current draw for boomer 400 and 600 continuous and peak?
Bigbob, on these I will have to leave it up to one of the other techs as I have not had any of these amps yet or experience with them.
Lon
tech808 |
Tech671
| | Posted on Monday, September 02, 2002 - 5:49 am: |
|
Approximately.....
400 - 38 amps
600 - 52 amps
That's max, that's what I'd plan around. |
Bigbob
| | Posted on Monday, September 02, 2002 - 3:14 pm: |
|
Thanks Tech671, then my 40 amp supply is right on for my 400. |
Tech671
| | Posted on Monday, September 02, 2002 - 6:37 pm: |
|
Actually, it's right on "the edge". Your supply is likely 40a "surge". You might leave the ole hammer in second gear..... |
Bigbob
| | Posted on Thursday, September 05, 2002 - 8:20 pm: |
|
It has a 70 amp surge transformer,homade supply,5 mj2955 pnp pass trans.,470,000 mfd.filter cap.,1Farad storage cap,8 gauge hook up wire,14 and 12 gauge wire in internalls. |
Tech671
| | Posted on Thursday, September 05, 2002 - 11:06 pm: |
|
Ok, I thought you were speaking of the "typical" 40a supply, which is usually 40 surge. You'll definately be AOK |
Bigbob
| | Posted on Friday, September 06, 2002 - 5:31 pm: |
|
THANX Tech671. |
|
