Author |
Message |
Radiodude
| Posted on Wednesday, December 18, 2002 - 8:57 am: |
|
My Melaka just went dead!! I checked the fuses and they are good. I dont smell anything burnt. Does anyone have an idea? |
307
| Posted on Wednesday, December 18, 2002 - 8:15 pm: |
|
Is it OFF all the way? 307 |
Radiodude
| Posted on Wednesday, January 01, 2003 - 7:29 am: |
|
Well Melaka is still dead!! Cked the fuses and even put new ones in!! There is pwr comming in to the xformer BUT Zero is comming out. I guess that means it is the prob!! What xfrmer do i need and where can I get one?? |
Bigbob
| Posted on Wednesday, January 01, 2003 - 10:41 am: |
|
Pull the transformer out and do a bench test,being careful to thoroughly insulate the connections of the power cord so as not to electrocute yourself,then test the output of the transformer.There is a small circuit board for the connection of the power cord and transformer internal of the radio,I beleive it's underneith,check ALL those connections first with a circuit tester,remember when plugged in to outlet the voltage present on that little board can kill you,so be very careful or take it to a tech,or disregaurd this whole diatribe if you are a tech because know more than I already. |
Bigbob
| Posted on Wednesday, January 01, 2003 - 10:47 am: |
|
Radiodude one more thing,when I got my eagle 2000 and did the multi-band mod.I noticed the little board in bottom was loose and power cord was loosening from board ,I knew it was a matter of time to no power so I repaired it right then. |
Radiodude
| Posted on Wednesday, January 01, 2003 - 6:00 pm: |
|
Well dont know what is going on but it seems to have fixed itself!! I turned it on and it came back on with no prob. It has been running for about 11hrs. Any Ideas???? |
|