| Author |
Message |
    
Roger Shepard
| | Posted on Tuesday, August 14, 2001 - 11:02 pm: | 
|
I have purchased a Pyramid PS25G power supply. It runs 22 amp con. and 25 amp surge. Will this run a galaxy 225 box? The box only has a 20 amp fuse so I figured it did not pull more or it would blow the fuse. I figured since the power supply was rated 22 and 25 it should work fine. What do you think? Thanks |
307 (307)
| | Posted on Wednesday, August 15, 2001 - 7:15 am: |
|
Yes , it will run it just fine. Anthing more than that though it most likely will not. |
Anonymous
| | Posted on Wednesday, August 15, 2001 - 2:50 pm: |
|
i had a palomar 225 on a 16 amp continous and 20amp surge at it wasnt enough. |
Skullman
| | Posted on Thursday, August 16, 2001 - 6:38 pm: |
|
I have a Palomar 225 running off a pyramid 14 amp power supply now and it works just fine. Although I had to cut the relay out for sideband, I hated the delay it gave me on AM.
CEO of DEADMAN INC. |
snowman787
| | Posted on Friday, August 17, 2001 - 11:22 pm: |
|
skullman how do you disable the delay in the palomar 225 |
Skullman
| | Posted on Saturday, August 18, 2001 - 3:10 pm: |
|
email me at skullman858@yahoo.com snowman and I'll send you a picture that shows how to do it.
CEO of DEADMAN INC. |
snowman787
| | Posted on Friday, August 17, 2001 - 5:30 pm: |
|
skullman I have a palomar 225 also and the delay is a real pain in the *** what do i have to cut to disable it? |
Snowman787
| | Posted on Sunday, August 19, 2001 - 4:54 pm: |
|
Thanx for the info Skullman all the locals that had to keep repeating themselves because of that damn delay thank you as well. |
Skullman
| | Posted on Monday, August 20, 2001 - 5:06 pm: |
|
No problem, anytime Snowman.
CEO of DEADMAN INC. |
Sonoma
| | Posted on Tuesday, August 21, 2001 - 2:08 pm: |
|
307 where is the modulation limiter at that can be cut to open the mod some more on the eagle sidewinder.thanks SONOMA
also i just received your video on this radio and a amendum needs to be put on it for the conversion .i can see why people are having trouble locating pins since there no longer are any and the board on mine was upside down versus the video |
307 (307)
| | Posted on Tuesday, August 21, 2001 - 6:17 pm: |
|
The Limiter in the Tomohawk is not a good idea to cut , I had a lot of trouble making the video cutting the AMC because the power supply is limited in current and problems came up. I tried to keep up with the video and the newer ones have an addendum in the back referencing the "new" mod. |
SONOMA
| | Posted on Wednesday, August 22, 2001 - 7:46 pm: |
|
HI 307 I NEED YOUR HELP AGAIN .I INSTALLED THE TALKBACK IN MY EAGLE SIDEWINDER AS YOUR #9 VIDEO SHOWS TO DO.MY PROBLEM IS YOU CAN BARELY HERE IT.I ALSO HAVE THE ECHO AND A D1O4-M6 POWER MIC.THE RADIO IS EXTREMLY LOUD I HAVE TO TURN THE MIC GAIN DOWN OR IT BLOWS THE RECEIVING PERSON AWAY. SO WHY IS THE TALK BACK SO LOW.I EVEN TURN THE GAIN ALL THE WAY UP.EVEN USED A EXTERNAL SPEAKER AND STILL THE SAME.YOU CAN NOT HEAR THE TALKBACK.YOU HAVE TO PICK AP THE SPEAKER AND PUT IT BY YOUR EAR.A LOCAL TECH LOOKED AT IT AND SAID HE WAS NOT SURE WHY IT WAS THIS LOW.ANY IDEAS .THANKS SONOMA |
SONOMA
| | Posted on Wednesday, August 22, 2001 - 11:34 pm: |
|
307 I WROTE YOU MY TALKBACK WAS VERY LOW ON MY SIDEWINDER AND I JUST CHECKED OUT THE PA AND ALL IT DOES IS POP THE SPEAKER WHEN YOU TURN THE PA ON.NO VOICE COMES OUT WHEN YOU TALK INTO IT .THE TALK BACK WAS PUT ON AND TRYED TO USE IT BEFORE THE ECHO WAS INSTALLED.IT DID NOT HAVE ANYTHING DIFFERENT THAN IT IS NOW.SONOMA |
