| Author |
Message |
    
Coltc99
| | Posted on Monday, March 03, 2003 - 1:26 pm: | 
|
I AM EXPECTING MY VR 9000 IN TOMORROW THAT I ORDERED FROM COPPER. I GOT YOU TO PEAK AND TUNE IT. IS THERE ANYTHING I NEED TO DO TO IT BEFORE I DO THE NPC MOD IN THE SUBSCRIBER SECTION.
THANKS, COLT |
Highlander
| | Posted on Monday, March 03, 2003 - 8:08 pm: |
|
Don't do the NPC mod....If 307 set it up, you are all set. Put it on the air before you mess with it. |
Crafter
| | Posted on Tuesday, March 04, 2003 - 12:48 am: |
|
If I had it to do over I would not have done the npc mod on mine. Don't get me wrong it works but not worth the time for the extra power I got. |
Coltc99
| | Posted on Tuesday, March 04, 2003 - 8:52 am: |
|
THANKS GUYS,
WHAT KIND OF WATTS CAN I BE LOOKING AT COMING OUT OF IT, AND DO YOU HAVE ANY ROGER BEEP MODS OR ANY OTHER. |
Crafter
| | Posted on Tuesday, March 04, 2003 - 4:13 pm: |
|
There are mods for the roger beep and another mod to add 10m voice back in. I'll look through my stuff later when I get down to my room. |
Coltc99
| | Posted on Wednesday, March 05, 2003 - 6:31 pm: |
|
THANKS 'CAUSE I SURE WOULD LIKE TO HAVE THE ROGER BEEP MOD!! |
Crafter
| | Posted on Thursday, March 06, 2003 - 1:29 am: |
|
Ok, the roger beep is controlled by r181 which is 220k ohms for a higher beep tone try a 150k to 200k ohms and likewise for a lower tone try a 270k to 2m ohm and the time of the beep is controlled by c134 which is a 2.2uf @16vdc for a longer beep use a 5 uf or 10 uf cap and likewise use a 1 uf @16vdc for a shorter beep.
Hope this helps COLT.
XLAXX,I decided to type it up even though I was dog tired. |
Coltc99
| | Posted on Thursday, March 06, 2003 - 8:44 am: |
|
YOUR A GOOD MAN!THANKS!! |
Xlaxx
| | Posted on Thursday, March 06, 2003 - 2:33 pm: |
|
Crafter-
Thanks Bro!
XLAXX |
Crafter
| | Posted on Monday, June 09, 2003 - 1:34 am: |
|
Ok, for some reason now my radio is not recieving on the same freq, Havnt used it in a month and tonight I turned it on and drops 1 kc on tx only on lsb anyone got a schem ? No I havnt messed with the insides since I did the channel conversion and its work all last summer then just out of the blue this? |
307
| | Posted on Monday, June 09, 2003 - 9:03 am: |
|
Go through the alignment for the "MELAKA" in the subscribe area of this forum and it tells you how to get the TX/RX Locked. The VR-9000 is the same as the Melaka...
307 |
Wareagle
| | Posted on Saturday, July 26, 2003 - 1:08 pm: |
|
VR-9000 has the ept-360014b board same as the
Galaxy 88 & the Superstar 3900,same 10 meter voice mod as Superstar 3900 |
