Author |
Message |
Saddletramp025
| Posted on Saturday, May 03, 2003 - 11:37 pm: |
|
Anyone know how to wire a d104 to a magnum257? |
Tech808
| Posted on Sunday, May 04, 2003 - 12:24 am: |
|
Saddletramp025, PIN #1 ~ SHIELD & BLUE / AUDIO PIN #2 ~ WHITE / RECEIVE PIN #3 ~ RED / TRANSMIT YELLOW & BLACK N/C Hope this helps. Lon Tech808 |
Tech671
| Posted on Sunday, May 04, 2003 - 10:14 am: |
|
1-2-3-5 are the pins used, audio-rx-tx-shield. For a D104 that would be: white on 1 black on 2 red on 3 shield and blue on 5 This applies to the following that use 6 pin plugs: Magnum 257, 357, Delta Force, Alpha Force, Millenium radios, Road Pro Titan, Prostar, Commanche, Albrecht 485, etc. |
Barefoot
| Posted on Tuesday, May 20, 2003 - 6:51 pm: |
|
Aries( Superstar) 452 to Magnum 257 ?? |
Tech808
| Posted on Tuesday, May 20, 2003 - 7:51 pm: |
|
Barefoot, STOCK wiring on the 4~Pin Plug for the 452 is: PIN #1 ~ GND PIN #2 ~ AUDIO PIN #3 ~ TX PIN #4 ~ RX STOCK wiring on the 5~Pin Plug for the 452 is: PIN #1 ~ AUDIO PIN #2 ~ GND PIN #3 ~ RX PIN #4 ~ COMMON PIN #5 ~ TX Sorry, I do not have the info for a 6 Pin Plug. Just a silly question, you posted in the Ask The Tech Section (Modifications) HTX-10 that you already hooked a Aries 452 Mic up to the Magnum 257 and said it was working great. Was it already wired for a 6 Pin Plug? Lon Tech808 |
Barefoot
| Posted on Tuesday, May 20, 2003 - 8:11 pm: |
|
tech 808 I am using the 452 with a 4 to 6 pin adapter. The adapter and mic are bigger than the radio. Would like to wire it for the 6 pin but not sure of the wiring and pin six is scarey! |
Tech808
| Posted on Wednesday, May 21, 2003 - 7:58 pm: |
|
Barefoot, By useing Tech 671's Helpful, wiring listed above, it should convert to the 6 pin plug as: PIN #1 ~ AUDIO PIN #2 ~ RECEIVE PIN #3 ~ TRANSMIT PIN #4 ~ OPEN/NC PIN #5 ~ GROUND PIN #6 ~ OPEN/NC Hope this will help. Thank you! Tech671 for the wiring on these radios. Lon Tech808 |
Wildchild
| Posted on Wednesday, December 17, 2003 - 3:52 pm: |
|
Will the TUG8-D104 work on the Magnum 257 and if it will how is it wired |
Tech808
| Posted on Wednesday, December 17, 2003 - 7:10 pm: |
|
Wildchild, For the Magnum 257 to Astatic D104-TUG8 is: PIN #1 ~ WHITE / AUDIO PIN #2 ~ BLACK / RECEIVE PIN #3 ~ RED / TRANSMIT PIN #5 ~ SHIELD / GROUND PIN #4 UP/DOWN and PIN #6 13.8V ARE OPEN ~ Not /Connected A suggestion is to CUT Pin #6 off of Mic Plug so nothing can short out against it. Hope this help's. Lon Tech808 |
|