| Author |
Message |
    
Radiodude
| | Posted on Saturday, August 30, 2003 - 12:53 pm: | 
|
I bought a 1011c and want to convert it to 11. Does anyone have any info on how to do it? |
2600
| | Posted on Friday, September 05, 2003 - 12:47 am: |
|
The only "conversion" needed is to make it transmit on the 11-meter band. The factory wired it for "receive only" on the 27 MHz band.
Unplug EVERYTHING, first. Remove the top cover. The band switch shaft emerges from behind the VFO shield cabinet into a switch wafer that has two green wires (and a few bare ones) on it. Unsolder the green wires from the switch. Twist the bare ends together and solder. Tape or preferably, insulate the end with plastic sleeving. Some folks prefer to leave them attached to the switch deck and solder a thin jumper wire across them. Either method works equally well. The radio will now transmit on both bands, rather than ONLY the 28.5 band as before.
A scan of the original manual, and file with the stuff they left out are at http://sonic.ucdavis.edu/siltronix/
73
|
Digger
Junior Member
Username: Digger
Post Number: 17
Registered: 2-2004
| | Posted on Wednesday, April 21, 2004 - 6:39 pm: |
|
Anyone have a working url. cant seem to get this on to work
Thanks
Digger
CEF#308 |
Viking
Intermediate Member
Username: Viking
Post Number: 127
Registered: 2-2002
| | Posted on Thursday, April 22, 2004 - 10:26 am: |
|
http://web.archive.org/web/20030604213729/http://sonic.ucdavis.edu/siltronix/ |
Digger
Junior Member
Username: Digger
Post Number: 19
Registered: 2-2004
| | Posted on Saturday, April 24, 2004 - 10:08 am: |
|
Thanks Viking
Digger
CEF#308 |
