| Author |
Message |
    
Triple9
| | Posted on Thursday, October 02, 2003 - 12:25 am: | 
|
bought a brand new galaxy 99v. pulled it out of box hooked it up as normal, no power I can hear a little noise out of the speaker when i turn the volume wide open but nothing else. i need help with this radio. i paid about 400.00 and it seems to be junk.
please help me |
Tech808
| | Posted on Thursday, October 02, 2003 - 12:52 am: |
|
Triple9,
Well if it is NEW out of the Box Send it back as there is a Two Year Warranty on it.
"As long as the FACTORY SEAL is not broken"
Almost $400.00
Copper has them for $324.99
http://www.copperelectronics.com/cgi-bin/checkitout/checkitout.cgi?catalogSTORE:CKIE:prod007-G10-00014+
Without Checking the Radio it could be ANYTHING, or it could have been damaged in shipping.
Either way with it Being NEW out of Box I would suggest calling and getting return Information.
Lon
Tech808 |
Triple9
| | Posted on Thursday, October 02, 2003 - 1:34 am: |
|
the seal has been broken |
Bruce
| | Posted on Thursday, October 02, 2003 - 8:02 am: |
|
hummmm why? if its new ..... I hope you didn't get stuck ... |
Scrapiron63
| | Posted on Thursday, October 02, 2003 - 10:09 am: |
|
When you say no power, do you mean the lights want even come on.
I had a strange happening a couple days ago, I know this is not the kind of problem you have, but anyway, I turned on one of my Ranger mobils, and nothing came on, no lights or anything, and I had used it just a day or so before. I opened the fuse holder enough to see the fuse was not blown, then I pulled the power cord out from the radio and checked it with my volt meter, it showed about 13 volts. So I thought the radio had problems, I took the bottom off and checked for voltage inside the power plug, it showed ok, then I turned the radio on and nothing, so I checked at the power plug with it on, it had dropped to about 2 volts. I then took the fuse out so I could see it good, it had corroded so much on one end that it would not let enough amperage go thur to power the radio. I don't remember that happening before in about 30 years of messing with these things. I've had corrosion build up on my connections at the battery before and lose voltage from on use to the next, but not on a fuse. scrapiron |
Triple9
| | Posted on Thursday, October 02, 2003 - 11:25 pm: |
|
no lights no nothing, could a wire from the power switch cause this problem? |
Bruce
| | Posted on Friday, October 03, 2003 - 4:17 am: |
|
a wire from the on/off switch would cause it |
307
| | Posted on Friday, October 03, 2003 - 8:37 pm: |
|
Send it down to me , its a freebee...email me...
tech307@copperelectronics.com
307 |
|
