| Author |
Message |
    
TheMerc
| | Posted on Thursday, October 11, 2001 - 12:19 am: | 
|
I called sales today, and they wont stock the 4800 w/echo. I read a earlier post where you mentioned that you may be able to find some. Just curious about the price ? and are they new ? I do know of another source, but... Drop me some mail if you would, themerc64@hotmail.com Thanks |
Forummaster
| | Posted on Thursday, October 11, 2001 - 4:34 pm: |
|
TheMerc,
Someone in sales must have screwed up because we had them in stock a week ago. They were on the last email special. Did you happen to get the name of the salesperson?
http://www.copperelectronics.com/cgi-bin/checkitout/checkitout.cgi?catalogSTORE:CKIE:prodE00-00006+
Forum Master |
TheMerc
| | Posted on Thursday, October 11, 2001 - 5:09 pm: |
|
Oh sure, now it just shows up on the web site too. I didn't get the gals name, but I got the impression since I was just checking price and availability on a item that was not listed yesterday on the web site, that I was given the brush off. Thank you Forummaster, I will check again with sales to make sure... |
Biged
| | Posted on Tuesday, January 08, 2002 - 3:45 pm: |
|
307,I have a galaxy 66 that I would like to be able to control the volume of the talkback on.It has the switch in the back to turn it off and on.I tried puting a potentiometer in line with this switch, but it did nothing.I was wandering if you know if there is a way to make this feature variable.Thank you in advance. |
Budman
New member
Username: Budman
Post Number: 4
Registered: 12-2001
| | Posted on Sunday, April 25, 2004 - 9:23 pm: |
|
Need channel conversion for Connex 4800 DXL can a tech out there help me . Thanks BUD |
Tech808
Moderator
Username: Tech808
Post Number: 2237
Registered: 8-2002
| | Posted on Sunday, April 25, 2004 - 11:30 pm: |
|
Budman,
#1 ~ Disconnect the Power cord and Mic.
#2 ~ Remove the Covers of the Radio.
#3 ~ Find J2 ~ It is at the FRONT of the radio almost in the Center, Move the Jumper.
#4 ~ Remove the Frequency Counter Module from the radio.
#5 ~ Now you will see a 6 PIN Jumper Block Marked J29,
Move the shorting block from it's current position to the back/right 2 Pins where the Red X's are marked below.
0XX
000
#6 ~ Re-install the Frequency Counter Module and put the Radio back together.
Hope this help's.
Lon
Tech808
|
Moonraker
New member
Username: Moonraker
Post Number: 5
Registered: 3-2005
| | Posted on Tuesday, March 29, 2005 - 10:11 am: |
|
That mod does not work for the new 4800 w/echo.Does anyone know what does? |
