| Author |
Message |
    
Straycat
| | Posted on Wednesday, October 10, 2001 - 8:18 pm: | 
|
307 I own a Connex 3300 that I bought recently in auction. Its an older model. It has one annoying problem. When I turn it on in my pick up in the morning it works fine; it blasts. The problem is this: In the afternoon when I turn it on and key up it squeals big time but only in the afternoon. My guess is that the rise in SWR due to conditions in the afternoon is making the final oscillate/crystal ??. Is this possible ? Will adjusting the bias solve this and if it will which VR is the one to turn. Wierd.... |
HIGH TECH REDNECK
| | Posted on Thursday, October 11, 2001 - 6:57 pm: |
|
I DONT KNOW MY QUESTION IS THE SAME... why my swr starts at 1.7 when i start my vehical but after my hour cummute to work its down to 1.3?? no rain either. and one more question...my swr gets lower as i get the max input of my linear...if its a 4 watt input linear i have to run at 4 watts no lower to get a good swr as i go lower on input the swr rises..why?? i have the antenna grounded to frame with 6 guage wire short as possible as well as the amp. all power wire direct to battery also. any help appreciated. |
|
