| Author |
Message |
    
Haymaker
| | Posted on Wednesday, December 03, 2003 - 2:09 am: | 
|
CAN NOT GET A 10.240 READING ON L61 FOR ADJ ON VC1 ALL OOOOOOO. REPLACED 10.240 CRYSTAL AND IC 17 NO LUCK. 2.2 VDC ON L17 &1.2 VDC ON L21 IC 7. WHEN RADIO WAS TURNED ON & TALKED ON AFTER ABOUT 5 MINUNTS WHILE TALKING THE RADIO WOULD JUST DRIFT OFF ABOUT 3 TO4 CHANNELS AND SLOWLEY COME BACK TO THE ONE I WAS ON. ANY HELPFULL HINTS WOULD BE GREATLEY APPRICATED. |
Ss8541
| | Posted on Wednesday, December 03, 2003 - 11:12 pm: |
|
my experience with this radio when this happens, is that resoldering the entire pll/vco area will fix the problem. sometime it has not. the 2950's pll system is complicated. infact, there is 2 vco's. so if resoldering this area does not fix it, then there isn't much more you can do on your own. |
Haymaker
| | Posted on Sunday, December 07, 2003 - 1:03 pm: |
|
THANKS FOR THE INFO SS8541. I HAD TO GO BACK IN MY MANULE NOTES, AND RE ADJ L4 AND THERE IT WAS 10.240. THANKS FOR THE INFO. |
Haymaker
| | Posted on Sunday, December 07, 2003 - 1:03 pm: |
|
THANKS FOR THE INFO SS8541. I HAD TO GO BACK IN MY MANULE NOTES, AND RE ADJ L4 AND THERE IT WAS 10.240. THANKS FOR THE INFO. |
|
