| Author |
Message |
    
620
| | Posted on Saturday, October 20, 2001 - 11:27 am: | 
|
I have an older Grant XL that has no outpt on
the am band.The unit works fine on LSB and USB
but no rf or modulation on AM.After the radio has been off for a few hours it will show a reading on the Dosey for a vary short time and then will
drop off to zero,any suggestions for afix would be
appricated. |
nuggett
| | Posted on Sunday, October 21, 2001 - 8:31 am: |
|
Sounds to me like the AM regulator is burnt!
(2sd1135)
Bottom cover off! radio facing you! its either bolted to the back right chassis! or on the back chassis with wires leading to the back right chassis.. If this is burnt it will play on SSB, but not on AM.. |
Roger
| | Posted on Monday, October 22, 2001 - 12:30 am: |
|
By the way my post is Its me again vern! read it and see what I had to say. |
Roger
| | Posted on Monday, October 22, 2001 - 12:29 am: |
|
hey 620 I have the same problem and took the same advice that nuggett gave but it does not work! 307 said it was a different part which is the am power reg. Ive put in a message for 307 as to the location of this part but he wont answer my post. Hope you get a reply. if you find out how to fix yours please tell me! Roger |
307
| | Posted on Monday, October 22, 2001 - 6:58 am: |
|
Sorry , I did not see the post , "which" part are we talking about..Most parts if not all parts can be found at dalbani.com |
|
