Copper Talk » Ask The Tech » Radio's Mobile » Archived Messages » Still working on the 719 « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Nighthawk
Junior Member
Username: Nighthawk

Post Number: 10
Registered: 5-2002
Posted on Saturday, May 01, 2004 - 5:49 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)
Thanks for the responses guys. The VR6 and VR7 are indeed the correct adjustments for power. But, when I cut R104 the radio will only key at the same low power as before but not modulate at all. The model of the board is PC621AA not the PC5833AA I stated last thread. I've read on previous posts that the R104 needs to be cut on model 719A and mine is a 719.Using a magnifying glass, I noticed that R102 had been cut and soldered back together. Does any of this matter? Thanks for your help.
Nighthawk

Add Your Message Here
Post:
Username: Posting Information:
This is a private posting area. Only registered users and moderators may post messages here.
Password:
Options: Enable HTML code in message
Automatically activate URLs in message
Action: