Author |
Message |
Aircop12
New member Username: Aircop12
Post Number: 6 Registered: 5-2004
| Posted on Thursday, June 03, 2004 - 8:47 am: |
|
I just purchased an Expander 500 from Copper's and it was wired to work with a 2995DX. I hooked it to the radio and everybody I talk to says it has a BAD hum. They say it sounds like a 60c. hum. What do I need to do so this mic can be used. |
Dindin
Intermediate Member Username: Dindin
Post Number: 150 Registered: 2-2004
| Posted on Thursday, June 03, 2004 - 8:04 pm: |
|
Aircop12,I'm gonna go out on a limb here and suggust the mic is more than likly picking up background noise,maybe a fan or something like that.if it trully is transmitting a 60cy hum then you may have a filter cap going bad in your power supply. |
Aircop12
New member Username: Aircop12
Post Number: 8 Registered: 5-2004
| Posted on Friday, June 04, 2004 - 3:47 pm: |
|
Ok, the only thing is that that I have (3) other mic's and none of them have this problem. I have the stock hand mic, astatic road devil, and a D104 Final Edition, all of these mic's work fine with no problems at all. ??? |