| Author |
Message |
    
Mike0228
New member
Username: Mike0228
Post Number: 2
Registered: 6-2004
| | Posted on Monday, July 19, 2004 - 7:36 am: | 
|
Ok I should be shot. Unlocked the clarifier on my XL then was doing the adjustments to recenter the pot. In a moment of stupidity lost track of what I was doing and moved L-21 instead of L-59. I've looked at the schematic to try and figure what L-21 does and how I may have affected the rig. Anyone know???
Thanks
Mac |
Tech808
Moderator
Username: Tech808
Post Number: 3004
Registered: 8-2002
| | Posted on Monday, July 19, 2004 - 6:25 pm: |
|
Mike0228,
First off, WELCOME TO THE COPPER FORUM!
GO to the Link below for the Complete Alignment Specs for the Grant XL.
http://www.radiomods.co.nz/grantxlalignment.html
You have mis-aligned the Loop Frequency output when you moved L-21.
Hope this helps but you will need good equipment or take it to a good Tech with good equipment to get the radio aligned right again.
Lon
Tech808 |
Mike0228
New member
Username: Mike0228
Post Number: 3
Registered: 6-2004
| | Posted on Monday, July 19, 2004 - 9:24 pm: |
|
Excellent Lon that's just what I need. I have the equiptment to do it. No problem.
Many thanks
Mac |
Tech548
Moderator
Username: Tech548
Post Number: 153
Registered: 5-2004
| | Posted on Tuesday, July 20, 2004 - 12:12 pm: |
|
Mike0228
I'm confused.
What modification calls for the removal of L-21, or any coil for that matter. Am I missing something here?
Jeff
Tech548 |
Mike0228
New member
Username: Mike0228
Post Number: 4
Registered: 6-2004
| | Posted on Friday, July 23, 2004 - 9:59 am: |
|
Jeff,
Not removal. I "adjusted" L-21 in error.
Mac |
Tech548
Moderator
Username: Tech548
Post Number: 168
Registered: 5-2004
| | Posted on Sunday, July 25, 2004 - 1:37 am: |
|
Good grief!!
I sure misread that one. My oppologies Mike.
Jeff
Tech548 |
