| Author |
Message |
    
Airwolf101
New member
Username: Airwolf101
Post Number: 1
Registered: 7-2004
| | Posted on Tuesday, August 03, 2004 - 8:45 am: | 
|
Hi There,
What kit or mods do i need to get the rest of the 40 and maybe the lower 40 also.And what resistor do i need to get talkback on this rig and not a very loud one at that.I'm fairly sure i know where to place it.Thanks in advance for your much needed advice,i really dig this oldie cobra.It's still like new... Airwolf 101 |
Tech808
Moderator
Username: Tech808
Post Number: 3193
Registered: 8-2002
| | Posted on Wednesday, August 04, 2004 - 12:30 am: |
|
Airwolf101,
WELCOME TO THE COPPER FORUM!
For that old of a cobra 29 it would be far cheaper and less headaches to find a good used 40 Channel Cobra radio.
To get the 40 channels in it you would need what they call an Expo Kit. Not worth the money for that old of a radio in my opinion.
And if it is in good shape like you say you really do not want to drill holes or remove something for an extra channel switch
For Talkback add / solder a 100 ohm resistor across the PA and Ext Speaker jacks on the radio.
Hope this helps.
Lon
Tech808
|
Airwolf101
New member
Username: Airwolf101
Post Number: 2
Registered: 7-2004
| | Posted on Wednesday, August 04, 2004 - 7:04 am: |
|
Hi Lon,
I agree it would mess the old radio up and the cost would not be justified.Thanks for the talkback info,i'll just add it and leave it be and find a connex or something with channels.
Thanks again, Airwolf |
