| Author |
Message |
    
Jessejames
Junior Member
Username: Jessejames
Post Number: 13
Registered: 2-2004
| | Posted on Thursday, August 19, 2004 - 9:02 am: | 
|
I'm not big into toys, but my friend would like a roger five tone beep installed and he lost the directions. Can you help me. |
Outlaw
New member
Username: Outlaw
Post Number: 3
Registered: 1-2004
| | Posted on Tuesday, May 31, 2005 - 6:55 pm: |
|
Red wire goes to 12volt supply. I put mine on the on volume knob, black wire to ground, they say use one of the screening cans, you could ground it at the power cord socket inside the radio. be sure you get it on the ground pin, not the hot. Blue wire goes to the audio pin on mic. socket. Green wire - yellow wire, If there is not a yellow wire, then solder green wire to transmit pin on mic. socket. If the yellow is there, remove wire on transmit pin, hook it to the yellow wire, then hook the green wire to the empty transmit pin. The orange wire will disable the beep when it is grounded. |
|
