Author |
Message |
1861
New member Username: 1861
Post Number: 6 Registered: 2-2004
| Posted on Monday, October 11, 2004 - 9:32 am: |
|
I RUN A SS 3900 PLUS , KLV 550 AND IMAXX 200 . EVERYTHING GROUNDED TO 8' RODS . I HAVE CHECKED WITH NEIGHBORS AND NO REPORTS OF TVI . HERE IS THE PROBLEM - I HAVE ONE TV THAT I COME IN THROUGH THE SPEAKERS ON ( DOESN,T MESS TV UP , JUST ON SPEAKERS . HAVE ONE NEIGHBOR PICKS ME UP ON STEREO . I TRIED PARA DYNAMICS LOW PASS FILTER - NO CHANGE . I HAVE A VECTRONICS ONE ORDERED . IF THAT DOESN,T DO THE TRICK , DO YOU HAVE ANY SUGGESTIONS ? WHAT ABOUT GROUND PLANE KIT ? THIS DOES IT EVEN ON 1 SETTING ON AMP |
Bruce
Senior Member Username: Bruce
Post Number: 1658 Registered: 9-2003
| Posted on Monday, October 11, 2004 - 10:59 am: |
|
yes beads on the tv and stereo speaker leads (forget GPK its a wast) |
Bob_p
Intermediate Member Username: Bob_p
Post Number: 461 Registered: 7-2004
| Posted on Monday, October 11, 2004 - 10:41 am: |
|
I was coming over the neighbors T.V. speakers and bought a few ferrite beads that go on the power cord right next to the T.V. and that took care of it. You can get them here. http://www.palomar-engineers.com/Ferrite_Beads/ferrite_beads.html Tell them what you want because they will try and sell you all sorts of stuff you don't need. 73 Bob |
1861
New member Username: 1861
Post Number: 7 Registered: 2-2004
| Posted on Monday, October 11, 2004 - 3:21 pm: |
|
THANKS FOR THE INFO . WHAT WOULD BE CAUSING THIS ? TOO MUCH MODULATION ? ALSO , OUT OF 4 TVs IN MY HOUSE , WHY WOULD IT JUST AFFECT ONE OF THEM ? ALSO , DO YALL THINK THE VECTRONICS FILTER MIGHT HELP ? I HAVE BEEN TOLD THEY ARE PRETTY GOOD |
Bob_p
Intermediate Member Username: Bob_p
Post Number: 463 Registered: 7-2004
| Posted on Monday, October 11, 2004 - 4:01 pm: |
|
The filters in that T.V. probably aren't as good as the other sets. Or the other T.V. sets are newer with newer and better filters built in to them. |
Hootyal
Intermediate Member Username: Hootyal
Post Number: 147 Registered: 9-2002
| Posted on Monday, October 11, 2004 - 4:36 pm: |
|
Try what Bruce suggested...Had to do this to my neighbors computer speakers..Used the ferrite block or cube from rat shack $5.00 I think and looped the wires through it 5-6 times, no more problems. |