| Author |
Message |
    
Spydrman
Member
Username: Spydrman
Post Number: 56
Registered: 12-2001
| | Posted on Thursday, January 27, 2005 - 6:04 pm: | 
|
The plug for the mic seems to be a little loose. It will twist left and right about a quarter of an inch. I've tried to tighten the lock nut but I really don't have the correct tool to do it. Is there a special tool? Is there a tool in my toolbox that you may suggest? It may not be a problem but it kind of drives me crazy.
Thanks for any inputs.... |
Tech808
Moderator
Username: Tech808
Post Number: 4666
Registered: 8-2002
| | Posted on Friday, January 28, 2005 - 5:07 pm: |
|
Spydrman,
If you have access to a Bench Grinder I made mine that I use.
I just took a couple of the Oldest nicked up dinged up 5/8" open end wrenches I had and put them on the grinder to to make them THIN enough to fit the slots in the Mic Nut's and they work GREAT. 
Lon
Tech808
CEF808
N9OSN |
Spydrman
Member
Username: Spydrman
Post Number: 57
Registered: 12-2001
| | Posted on Friday, January 28, 2005 - 6:25 pm: |
|
Thanks 808, I'll give it a try..... |
