| Author |
Message |
    
Luckyboy
New member
Username: Luckyboy
Post Number: 1
Registered: 2-2005
| | Posted on Friday, February 04, 2005 - 9:25 pm: | 
|
once a freq. is programmed into memory, is there a way to delete that position? Or is it only possible to overwrite it with a new frequency. Can the 9 memory slots be deleted by reset?
|
Inspector
Intermediate Member
Username: Inspector
Post Number: 122
Registered: 12-2001
| | Posted on Saturday, February 05, 2005 - 1:45 am: |
|
My experience is that you have to overwright the memory(s). If you reset the CPU, the memories should zero-out. This could be accomplished by removing the radio from the DC power source and turning the radio's power switch "on", and after some time (enough to drain the memory capacitor) turn the SW off and power-up. This will also re-set your display to the lowest band-limmmit. |
Luckyboy
New member
Username: Luckyboy
Post Number: 2
Registered: 2-2005
| | Posted on Saturday, February 05, 2005 - 11:01 pm: |
|
Thank you for your reply. I will try it and let you know if I had any success |
