| Author |
Message |
    
Kd4amg
Intermediate Member
Username: Kd4amg
Post Number: 167
Registered: 6-2003
| | Posted on Wednesday, March 09, 2005 - 7:22 pm: | 
|
I need tune - up & mike wiring info on a tristar 120.... this rig appears to be mid 1980 s vintage.
digital readout
4 level led s / rf meter
volume / squelch/channel selector knobs
2 led under display ..1 HI -- 1 LOW
3 position switch between squelch knob & readout vertical hi/cb/lo from top to bottom.
size is about like a uniden 510 / 4 pin screw on mike connector...no 3 pin dc input on rear, has red/black cords coming through rear panel...pa/cb switch on side of unit
this unit has stock AM 40 cb channels
40 channels below channel ONE
40 channels above channel 40
AM only
|
Tech808
Moderator
Username: Tech808
Post Number: 5160
Registered: 8-2002
| | Posted on Wednesday, March 09, 2005 - 8:40 pm: |
|
Kd4amg,
You will find the Tristar 120 Tune Up information I have listed in the Modification List.
Stock Mic Wiring is:
PIN #1 ~ Audio
PIN #2 ~ Shield
PIN #3 ~ Receive
PIN #4 ~ Transmit
Hope this helps,
Lon
Tech808
CEF808 |
Kd4amg
Intermediate Member
Username: Kd4amg
Post Number: 168
Registered: 6-2003
| | Posted on Wednesday, March 09, 2005 - 9:26 pm: |
|
So mike wiring appears to be same as some MIDLAND models... thanks for your help...Bobby |
