| Author |
Message |
    
Wayne
Junior Member
Username: Wayne
Post Number: 32
Registered: 12-2001
| | Posted on Monday, May 30, 2005 - 9:38 am: | 
|
I have a 60ft. tower with TV antenna I was thinking abour taking the tv antenna off and putting my I-max on top and also putting my 31 ft.6 element beam up with the I-max but now I am having sec. thoughts, maybe I will just put the I-max up with the tv antenna. and just add to my other tower and put the beams up another 30ft. by itself. I have already have the tower. Need some good advice. Wayne CFM158 |
Road_warrior
Advanced Member
Username: Road_warrior
Post Number: 613
Registered: 7-2004
| | Posted on Wednesday, June 01, 2005 - 11:27 am: |
|
Are you still using the TV antenna?
Are you mounting your beam Verticle
or flat side?
If your mounting the beam flat side, then
a Imax can be mounted above it on the
same tower.
If your beam is dual polarity or is going
to be mounted verticle then use 2 different
towers.
JIM/ PA/ CEF 375 |
Wayne
Junior Member
Username: Wayne
Post Number: 34
Registered: 12-2001
| | Posted on Wednesday, June 01, 2005 - 1:50 pm: |
|
Hello Jim thanks for getting back. I haven't been using my TV antenna but the way the prices are going up on cable and sat. I have been thinking about using tv antenna again put a lot into tv antanna when I put it up.I might decide to put vert. elements on the beam, also its a 12 element lazar. |
Road_warrior
Advanced Member
Username: Road_warrior
Post Number: 617
Registered: 7-2004
| | Posted on Wednesday, June 01, 2005 - 6:46 pm: |
|
In that case mount the Imax above your
TV antenna and put beam on a separate
tower.
Good Luck with whatever you decide to
do.
JIm/ PA/ CEF 375 |
