| Author |
Message |
    
Wareagle
| | Posted on Wednesday, December 12, 2001 - 2:19 pm: | 
|
Will this work??
1= remove d-18,r110,c131,and r-112
2= put a jumper where r-110 was
3= take orange wire from delta
tune&unsolder it from the board,then
resolder it to a constant 8 volt dc
supply(for instance to tr 23 "closest
pin to front of the board" in the
uniden this would be q- 23")
4= you should slide 5-6khzs up and down
(for more slide change d-16 to a IN-4007
diode)
WILL THIS WORK,I WOULD REALLY LIKE TO KNOW!!!!!!! |
Jyd
| | Posted on Wednesday, December 12, 2001 - 7:09 pm: |
|
if it does do you do the exact same thing to both radios,and does it give you 40 up and 40 down |
Themerc
| | Posted on Monday, December 17, 2001 - 12:35 am: |
|
Wareagle,
Yes it works just fine. Use the 1N4007 it will give you a full 10KHz in a least one direction so you can have the "A" channels. It takes a little tuning to get it right.
JYD,
Yes same mod for both radios, but it is not a channel mod. Watch for different part numbers between the 29 & 76/78 |
Wareagle
| | Posted on Tuesday, December 18, 2001 - 9:19 am: |
|
the wire on a uniden pc 76xlw from the delta tune
is pink |
Jyd
| | Posted on Tuesday, December 18, 2001 - 3:11 pm: |
|
yeah,but does the radio have to be realhined after this is done |
|
