| Author |
Message |
    
Earlybird
New member
Username: Earlybird
Post Number: 1
Registered: 1-2005
| | Posted on Tuesday, November 29, 2005 - 6:43 pm: | 
|
I have a RCI 2950.It had from 21.000 to 32.000 MHz.
For some reason now it only has from 26.000 to 32.000
MHz.OOPS what happened. Can anyone help ? |
Inspector
Intermediate Member
Username: Inspector
Post Number: 151
Registered: 12-2001
| | Posted on Thursday, December 01, 2005 - 1:13 am: |
|
Is tis the DX model??? They convert to cover 21MHz. |
Bruce
Senior Member
Username: Bruce
Post Number: 3271
Registered: 9-2003
| | Posted on Thursday, December 01, 2005 - 9:12 am: |
|
Can you run one on 15 ????? |
Earlybird
New member
Username: Earlybird
Post Number: 2
Registered: 1-2005
| | Posted on Thursday, December 01, 2005 - 10:28 am: |
|
I think it is the DX , it has a green back light face. No it didn't go to 15.000 . It only went from 21.000 to 32.000 . I first noticed it when the mike shorted and the buzzer buzzed. I appreciate any help.
thanks. |
Earlybird
New member
Username: Earlybird
Post Number: 4
Registered: 1-2005
| | Posted on Tuesday, December 06, 2005 - 11:17 pm: |
|
Can this be a IC problem .Maybe Inspector or Tech808
can answer this ?.They seem to know a lot about the 2950.I called RCI tech support they were no help. All
help is greatly appreciated.
earlybird
CEF-537 |
Earlybird
New member
Username: Earlybird
Post Number: 5
Registered: 1-2005
| | Posted on Monday, December 12, 2005 - 11:06 pm: |
|
It may be the old 2950 the CPU has a battery on it.The main PC board # is 295013Z.
Thanks for ant help.
Earlybird
CEF-537 |
Earlybird
New member
Username: Earlybird
Post Number: 7
Registered: 1-2005
| | Posted on Tuesday, December 13, 2005 - 12:19 am: |
|
oops thanks for any help  |
Inspector
Intermediate Member
Username: Inspector
Post Number: 152
Registered: 12-2001
| | Posted on Tuesday, December 20, 2005 - 1:30 am: |
|
Since it is the DX model with the green back-light, the modification for coverage 21-32MHz is to have the expansion module installed and two small jumpers on two pair of pins, on the CPU board. If one of the jumpers comes off, this could cause loss of the lower band...just an idea. |
