| Author |
Message |
    
Bronzepony
Junior Member
Username: Bronzepony
Post Number: 14
Registered: 12-2005
| | Posted on Tuesday, December 20, 2005 - 9:43 pm: | 
|
I need help with this one my 148f is on frec. when on recieave but when i go to transmit it drops 10k on all channels. It has had no mods.
It is not just the frec. counter i checked with my eagles and it is truely dropping |
Dave1
Intermediate Member
Username: Dave1
Post Number: 116
Registered: 9-2005
| | Posted on Thursday, January 05, 2006 - 10:07 am: |
|
I have a 148F from the 80s still NIB never used it lol I will have to find it first I know its here I dont think they still make them do they?
Dave |
Bert
Junior Member
Username: Bert
Post Number: 35
Registered: 12-2005
| | Posted on Thursday, January 05, 2006 - 1:57 pm: |
|
Dave, Good luck finding the problem with the other radio..... |
Hotwire
Advanced Member
Username: Hotwire
Post Number: 802
Registered: 1-2005
| | Posted on Friday, January 06, 2006 - 10:52 am: |
|
Bronzepony, If the transmit is off freq just use the course clarifier to get back to center freq while you key the mic. After that just fine tune the recieve. Also make sure that your 10 kc button is turned off!
I have one of the 148fgtldx+ radios too!. They are awesome sounding in the audio department! |
Hotwire
Advanced Member
Username: Hotwire
Post Number: 803
Registered: 1-2005
| | Posted on Friday, January 06, 2006 - 10:57 am: |
|
Dave1,
Cobra no longer makes the 148 FGTL DX type radios. I believe the Connex 4800 is pretty much the same radio being made today. Whenever I get the chance to get my hands on one for a reasonable deal I get it! One of the best ever made my opinion. Would not mind owning a stack of them!  |
Freebird
Intermediate Member
Username: Freebird
Post Number: 336
Registered: 1-2003
| | Posted on Tuesday, January 10, 2006 - 1:29 am: |
|
i found out the cobra 148f was made in 1997 i thought they were older but cobra says no. |
