| Author |
Message |
    
Kd4amg
Intermediate Member
Username: Kd4amg
Post Number: 203
Registered: 6-2003
| | Posted on Sunday, January 22, 2006 - 1:09 pm: | 
|
I have apparently a very old Magnum Delta Force 10 / 11 meter mobile. It does not have the " modification selector board " in the rear of the unit , and several small other things that I need answers to --
*** the digital s / rf meter only works in transmit ( regular meter works ok )
* AMT apparently does not work at all ( no talkback )
*** no owners manual, so how do you program in memory channels ?
*** 6 pin mike wiring diagram
it talks good and hears good, it just has those 4 small situations ( mostly NO TALKBACK at all ).
can you help...I left a message in one of these sections yesterday with the wrong name of the radio ( I called it a magnum millenium ) and read an answer, then I made a post of correcting the name of the rig and I cant find any of the thread now. ?
Robert |
Tech808
Moderator
Username: Tech808
Post Number: 9050
Registered: 8-2002
| | Posted on Sunday, January 22, 2006 - 1:25 pm: |
|
Kd4amg,
Your posts from yestrerday are located in the Area below.
» Modifications
» Radios
» Magnum Millenium situations
Hope this helps,
Lon
Tech808
CEF808
N9OSN |
Slim1
Intermediate Member
Username: Slim1
Post Number: 111
Registered: 4-2002
| | Posted on Saturday, January 28, 2006 - 11:13 pm: |
|
What you have there is the 1st generation Delta.
To convert/channel those you have to remove the faceplate (and knobs) and remove a resistor(SMT)!
The digital meter DOES only work on TX.
Microphone pin-out is the same as the current Delta and the Omega both.
The info is out there on the web;just gotta search and find it.If I could,I'd scan and email
a page I have from when mine was done,but I'd have such a headache trying!If all else fails
let me know and we'll give it a shot!
Slim |
|
