| Author |
Message |
    
Wankle
New member
Username: Wankle
Post Number: 7
Registered: 5-2003
| | Posted on Tuesday, January 24, 2006 - 4:58 pm: | 
|
I want to center my clarifer on my S9 .
can someone help me with the procedure.
seems like my transmit is off frequency on both lsb and usb with my course clarifer centered.
thanks guys |
Bc910
Advanced Member
Username: Bc910
Post Number: 676
Registered: 7-2004
| | Posted on Wednesday, January 25, 2006 - 3:25 pm: |
|
Wankle
FREQUENCY ADJUSTMENT AM - L19, USB - L27, LSB - L21
Remember though you'll void your warrenty, you may want to send it in instead.
Also you may want to know
FREQUENCY COUNTER / MCU BOARD
C105 - Counter Adjustment
BC |
Dale
Intermediate Member
Username: Dale
Post Number: 279
Registered: 12-2002
| | Posted on Wednesday, January 25, 2006 - 5:51 pm: |
|
bc910 is absoulely right but this is alot more complex then a simple peak and tune ya really need an external freq counter to do this mod
correctly,cause once the transmit is all aligned up then ya have to readjust your built in counter on the radio.my 2 cents worth
dale/cef426 |
Wankle
New member
Username: Wankle
Post Number: 8
Registered: 5-2003
| | Posted on Wednesday, January 25, 2006 - 8:28 pm: |
|
ok , warrenty is long expired. I bought this radio used , it is about 1 year old.
It works very nice just the fine clarifier has to be about 9 am to be on frequency. yes the fine clarifier is unlocked i checked.
I have a frequency counter and oscilloscope so I'm going to attempt it. Looking at the galaxy 99 alignment procedures and schematic it looks mostly the same.
I will be careful. I will check test points against the S9. I noticed some test points missing but found out where they went.I did some test measuring and found they are the same as the galaxy's
I'm going to try it this weekend. |
