| Author |
Message |
    
Thehobo
Member
Username: Thehobo
Post Number: 60
Registered: 2-2004
| | Posted on Thursday, January 26, 2006 - 1:10 pm: | 
|
agin this has probley been asked but?? when setting up a new antenna, should the swr's be set with a dk of 4 watts or a 100 watts?? i have meters capable of either wattage!! in past useage's, ive noticed that if i first set swr at 4 watts, then recalibrate the meters and use a 100 watts, i can usually fine tune the gammas closer to the flat stage?? ive found that the higher wattage i can set the swr's at, the flatter they stay at HIGHER wattages!!! or am i just blowing smoke?? thanks for the input...
thehobo
274150 am.
monitor ch. |
Marconi
Advanced Member
Username: Marconi
Post Number: 561
Registered: 11-2001
| | Posted on Thursday, January 26, 2006 - 6:46 pm: |
|
Yes I think you got that one right. |
Thehobo
Member
Username: Thehobo
Post Number: 61
Registered: 2-2004
| | Posted on Friday, January 27, 2006 - 9:54 am: |
|
lol, ok, on witch is rite, blowing smoke or yes, doing the low wattage first, then going to the higher wattage??? ???? ????
thehobo
274150 am
monitor ch |
|
